<div dir="ltr"><div dir="auto">My understanding is that as part of the Archlinux/arm installation process, you've flashed some Arch-specific firmware to the device (as per steps 13-14 of <a href="https://archlinuxarm.org/platforms/armv5/seagate-goflex-net">https://archlinuxarm.org/platforms/armv5/seagate-goflex-net</a>). So it's not going to boot without the USB disk containing Arch OS, nor will it revert Seagate OS. But it sounds like Arch successfully boots with the USB disk, so that's good.</div><div dir="auto"><br></div><div>What about removing the Arch USB disk and editing it from another machine before putting it back in the GoFlex? If you can edit a script that executes on startup, then you can run arbitrary commands on the device and diagnose/solve the problem from "inside". One route would be creating a cron job which runs on startup ("@reboot") by saving a file to /etc/cron.d. May take some trial and error (permissions etc).<br></div><div><br></div><div>The startup script could try:</div><div>- restarting the SSH server and saving a log to disk for your later investigation in another machine</div><div>- listing the firewall rules - the device responding to ping but refusing port 22 suggests maybe a firewall issue?</div><div><br></div><div>Good luck</div><div><br></div><div>Matthew</div><div><br></div></div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, 24 Jun 2020 at 18:04, Alistair Boak <<a href="mailto:alistairboak@gmail.com" target="_blank">alistairboak@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="overflow-wrap: break-word;">Hi Mark,<br><div><br><blockquote type="cite"><div>On 24 Jun 2020, at 15:16, Mark Turner <<a href="mailto:replicant.mark@gmail.com" target="_blank">replicant.mark@gmail.com</a>> wrote:</div><br><div><div dir="ltr">Hi,<div>          I seem to recall that these goflex boxes used busybox/uclibc and if you did a reset, maybe you can just access the web interface with default user/pass and enable ssh</div><div>Mark</div></div></div></blockquote></div><br><div>Thank you, I’ve done a soft and hard reset and have tried <a href="http://router-reset.com" target="_blank">router-reset.com</a>’s 30,30,30 reset, however, the 'Net' reset to the old IP address, but still no luck as  I had removed the USB disk with Archlinux/arm on it hoping it would go back to Seagates OS what ever it is but it didn’t even start and I couldn’t ping it.  But now with the USB disk back in the light settles and I can ping it but it won’t accept the Archlinux default password for the user account or the root account (neither of which I had changed as I was just playing around with it.) The ‘Net’ is on another router behind my main one and there’s no port forwarding or anything, just in case you thought I was being more of an idiot then I’ve been so far!).</div><div><br></div><div>Anyway thanks for the assistance, but, I think I’m going to have to go with the serial cable route, but thats fine I enjoy the tinkering and I’ll let everyone know how it goes.  Now where did I put that solder…!!</div><div><br></div><div>Cheers</div></div><div style="overflow-wrap: break-word;"><div><br></div><div>Alistair</div></div>-- <br>
EdLUG mailing list<br>
<a href="mailto:EdLUG@lists.edlug.org.uk" target="_blank">EdLUG@lists.edlug.org.uk</a><br>
<a href="https://lists.edlug.org.uk/mailman/listinfo/edlug" rel="noreferrer" target="_blank">https://lists.edlug.org.uk/mailman/listinfo/edlug</a></blockquote></div></div>